IQ 3
The Audio Note IQ cartridges are the finest Moving Magnet designs currently available. A refinement of the established Moving Magnet principle, they offer an excellent combination of exceptional tracking ability, dynamic range and longevity, thanks to the extremely high quality components used for their construction.
The internal coils are made from extremely fine copper wire, and the IQ III uses the same cantilever material and diamond found in the legendary Audio Note IO I moving coil cartridge. Made from titanium tube rather than aluminium, the cantilever is unique, and in combination with the Audio Note Type 2 diamond, offers a level of performance that was often though impossible to achieve with a Moving Magnet design.
The complete stylus assembly is removable, making replacement or upgrade a very simple and cost effective process. In fact, all of the IQ stylus assemblies are interchangeable, meaning that you could start with an IQ-1, and eventually replace the stylus assembly with the vastly superior version used in the IQ-III.
It has been designed to be used with a Moving Magnet compatible phono-stage, with an input impedance of 47K Ohms. Total capacitance in parallel (including arm lead and amplifier capacitance) should not exceed 200pF. If other values of load resistance and capacitance are used, the frequency response of the cartridge may depart from the specified values.
FACTS
Internal Inductance
570mH
Internal Resistance
660 Ohms
FREQUENCY RESPONSE
20Hz to 20KHz, +/- 2dB
CARTRIDGE WEIGHT
6,3g
FIXING CENTRES
12.7mm / 0.5”
TRACKING FORCE / WEIGHT
1.5g – 2.5g (1.75g nominal)
CHANNEL BALANCE
2dB @ 1KHz
CHANNEL SEPARATION
25dB @ 1KHz
SENSITIVITY
6.5mV +/- 1.5dB
1KHz @5cm/sec
Stylus
Audio Note Type II
EQUIVALENT TIP MASS
0.45mg
VERTICAL TRACKING ANGLE
24 degrees